Pitney Bowes DM230L User Manual

Before you run mail on your system, review the Checklist below. 

•  Make sure your mailing system is plugged into a properly grounded, 

110 VAC receptacle. Always follow the safety precautions in Chapter 1.

•  Check the level of sealing solution in the moistener. If you need to add 

sealing solution, refer to Chapter 6 in this guide.

•  If you plan on printing tape strips make sure you've loaded an  

adequate supply. See Chapter 6 for instructions.

•  Check that you have enough postage for your mail run. Refer to  

Chapter 5 for instructions on checking the amount of postage in your 
system and your account. 

When you power up your system, the Ready screen appears on the  
Control Centre operating display. If your system has been set up to  
require a lock code or password, you are prompted to enter it.
A typical Ready screen is show here:

Class: None

Place mail on scale or

Enter manual weight

0.000kg
2006.08.17

•  To process a mail piece from the Ready screen you must place your 

mail piece on the optional scale or enter the weight of the mail piece 
manually, and then select a class. For more information on processing 
mail, please refer to the specific topics later in Chapter 3.

•  If you want to do something other than print postage on an envelope 

or tape, press the Options key. This provides you with access to other 
mailing modes and the system setup options. For information on the 
setup options refer to Chapter 4 in this guide.