Pitney Bowes DM230L User Manual

3.  Push the envelope to the rear (A)  

so its top edge is up against the 
back wall of the system.

4.  Slide the envelope to the right (B) 

until the system grasps it. The  
system prints the postage and  
ejects the envelope. 

1.  Hold the envelope ADDRESS SIDE UP.
2.  Pull the flap slightly away from the envelope.
3.  Slide just the flap under the blue edge of the feed deck as shown.  

A brush below the deck wets the flap.

4.  Slide the envelope to the right until the system takes hold of it.  

The system prints the postage and ejects the piece.

5.  To complete sealing, compress the envelope stack. 
 

See Chapter 6 for instructions on refilling and maintaining the  
moistener.