Pioneer HD VIDEO SYSTEM HD-V9000 User Manual

En

• Be sure to turn this unit’s power off (to the standby 

mode) before connecting or disconnecting USB 
storage devices.

• When using an external HDD (hard disk drive) as the 

external storage device, be sure to turn on the HDD’s 
power before turning on this unit’s power.

• If the USB storage device is write-protected, be sure 

to disable the write-protection.

• When connecting the USB cable, hold onto the plug, 

set the plug in the proper direction for the port, then 
insert it horizontally.

• Placing excessive loads on the plug may result in 

faulty contact, making it impossible to read the data 
on the USB storage device.

• Do not unplug the power cord when a USB storage 

device is connected and this unit’s power is turned 
on.

• It is not possible to use the two USB ports 

simultaneously.

• Devices may not work if connected to the 

USB port via 

a memory card reader or USB hub.

• Use a USB cable with a length of two meters or less.

Connect the power cord after all the connections between 
the devices have been completed.

Rear panel

Hard disk 
drive, etc.

USB cable 
(commercially 
available)

USB 
memory, 
etc.

Rear panel

Uninterruptible 
power supply, etc.

Power cable 
(included)