Pelco Endura GW5000 Gateway GW5000 User Manual
24
C2694M (7/08)
ENTERING THE PRIVATE NETWORK INTERFACE HOST INFORMATION
1. From the Setup page, select Private Network Interface.
2. Enter or select the appropriate information for your LAN site:
•
Host Name
•
DHCP (enable or disable DHCP for the system)
•
IP Address
•
Subnet Mask
•
Gateway
•
DNS Server IP
3. If you have more than one domain name system server IP address, enter them on separate lines.
4. Select Routing Protocol Authentication if your site uses a third-party software to authenticate data transmissions between the gateway
and the Endura network.
5. Click Apply to save the new information, or click Reset to return to previously saved settings.
Figure 20. Private Network Interface Page