Pelco Endura GW5000 Gateway GW5000 User Manual
C2694M (7/08)
25
ADDING DEVICE NETWORK ADDRESSES
The Endura gateway is designed to recognize all available devices that are connected to the Endura system. If you notice a camera is not
available, you can add its network address.
available, you can add its network address.
1. From the Private Network Interface page, click the Test button below the Existing Networking table (refer to Figure 21). The gateway polls
the Endura system and lists the network address and machine bitmask for each device that has not been recognized automatically.
2. On systems that enable DHCP, enter the IP address for the Endura network gateway as it appears in the Gateway field.
3. Under Manual Entries, enter the network address and the machine bitmask. Click the Add button.
4. Repeat this step for each device.
Figure 21. Adding Devices Addresses