Tripp Lite SNMP Solo MT-SE-37/02 User Manual
SNMP Solo
16
Configuration
To set an access control, at the prompt type:
Set, <space>, enter the number of the column from 1 through 4,
<space>, enter the IP address, <space>, name of the
community string, <space>, and access code—r for read only
or w for read and write. Press <enter>. For example:
<space>, enter the IP address, <space>, name of the
community string, <space>, and access code—r for read only
or w for read and write. Press <enter>. For example:
The new values display on the top of the screen:
To clear access controls of any manager IP address, type
clear, <space>, and the desired list number at the prompt.
Press <enter>.
clear, <space>, and the desired list number at the prompt.
Press <enter>.
The top of the screen reflects your changes:
To return to the Main Menu, type 0 and press <enter>.
Set Trap Receivers
Use this screen to determine which IP managers receive traps
(messages) from your SNMP Solo. This screen permits you to
send traps about your UPS to four IP addresses (managers).
Also, you may determine the severity levels to assign to a
particular manager. To access the trap setting screen, type 3
from the Main Menu. The following screen displays:
(messages) from your SNMP Solo. This screen permits you to
send traps about your UPS to four IP addresses (managers).
Also, you may determine the severity levels to assign to a
particular manager. To access the trap setting screen, type 3
from the Main Menu. The following screen displays: