Tripp Lite SNMP Solo MT-SE-37/02 User Manual
Tripp Lite
Configuration
17
Figure 8 Trap Receivers
To set traps, at the prompt type:
Set, <space>, enter the number of the column from 1 through 4,
<space>, enter the IP address, <space>, severity code–1,2, or
3, and name of the community string. Press <enter>. The
severity level codes for messages are:
<space>, enter the IP address, <space>, severity code–1,2, or
3, and name of the community string. Press <enter>. The
severity level codes for messages are:
• 1 Informational
• 2 Warning
• 3 Severe
• 2 Warning
• 3 Severe
The trap receiver receives all assigned severity level messages
and the ones rated above. If you assign severity code 2, the
manager receives warning and severe levels.
and the ones rated above. If you assign severity code 2, the
manager receives warning and severe levels.
A set trap example.
The top of the screen reflects your changes: