Paradyne Broadband Access Concentrator 8820 User Manual

1. Network Management Specification

June 2003

8000-A2-GB30-00

7.8

Link Fault Management.

This sections describes the mibs associated with the Automatic Protection Switching (APS),
Manual Dual Link Load Sharing (DLLS) and Redundancy Features.

7.8.1

Automatic Protection Switching (APS) -
draft-ietf-atommib-sonetaps-mib-xx.txt

This MIB objects are used to control and manage SONET linear APS architectures. The
generation of APS notifications is enabled by default (apsNotificationEnable).

The object pdnLinkFaultMgmtApsSelection is used to enable/disable APS in the device. By
default this object is disabled.

The following subsections highlights special cases and/or limitations on the support of some
objects in these tables.

7.8.1.1

apsConfigMode.

This object allows configuration of the APS mode. Only the following two values are to be
supported: onePlusOne(1) and oneToN (2).

7.8.1.2

apsConfigRowStatus

This object is supported read-write rather than read-create. Thus, no new rows can be added
to this table.

7.8.1.3

apsChanConfigRowStatus

This object is supported read-write rather than read-create. Thus, no new rows can be
added to this table.

7.8.1.4

apsConfigExtraTraffic.

This object enables or disables the transfer of extra traffic on the protection channel in a 1:n
architecture. This object will be supported read-only.

Table 1-86. pdnLinkFaultMgmtApsSelection

Table

Comments

apsConfigEntry

Supported as is except for the special cases indicated here.

apsStatusEntry

Supported as is

apsMapEntry

Supported as is

apsChanConfigEntry

Supported as is except for the special cases indicated here.

apsCommandEntry

Supported as is

apsChanStatusEntry

Supported as is

apsNotificationEnable

Supported as is