Paradyne Broadband Access Concentrator 8820 User Manual
1. Network Management Specification
8000-A2-GB30-00
June 2003
81
7.8.2
Link Load Sharing (LLS) - (PDN-LINK-LOAD-SHARING-MIB.mib
)
The object pdnLinkLoadSharingSelection is used to enable Load Sharing in the device. By
default Load Sharing is disabled.
default Load Sharing is disabled.
7.8.2.1
pdnLLSConfigGroupName.
This object contains a text describing a group configured for load sharing.
7.8.2.2
pdnLLSConfigSelection.
This object allows managers to enable and disable the link load sharing on this group.The
default value for this object is disabled.
default value for this object is disabled.
7.8.2.3
pdnLLSMapGroupName.
This object is used in the pdnLLSMapEntry to map uplink interfaces and load sharing
groups. This Group Name corresponds to one of the groups defined in the
pdnLLSConfigTable.
groups. This Group Name corresponds to one of the groups defined in the
pdnLLSConfigTable.
7.8.3
Enterprise link failure management-
(PDN-LINK-FAULT-MGMT-MIB.mib)
(PDN-LINK-FAULT-MGMT-MIB.mib)
The object pdnLinkFaultMgmtSwitchoverSelection is used to enable and disable the
Switchover due to link failure feature in this device. By default, switchover is disabled.
This feature can not be enabled if APS is enabled.
Switchover due to link failure feature in this device. By default, switchover is disabled.
This feature can not be enabled if APS is enabled.
7.8.4
Entity redundancy - (PDN-ENTITY-REDUNDANCY-MIB.mib)
The object pdnEntityRedundancySelection is used to enable and disable the redundancy
feature. By default, this object is disabled.
feature. By default, this object is disabled.
Table 1-87. Link Load Sharing
Table
Comments
pdnLLSConfigEntry
Supported as is
pdnLLSMapEntry
Supported as is
Table 1-88. pdnLinkFaultMgmtSwitchoverSelection
Table
Comments
pdnLinkFailureConfigEntry
Supported as is
Table 1-89. pdnEntityRedundancySelection
Table
Comments
pdnRedunCmdEntry
Supported as is
pdnRedunStatusEntry
Supported as is