Panasonic Attune II Operating Guide
13
wVolume adjustment
Wear the headset, and press the volume control buttons
[+] [–] on the Belt Pack to adjust the volume of the headset
to the proper level.
[+] [–] on the Belt Pack to adjust the volume of the headset
to the proper level.
wCommunications with
customers (TALK)
Any store personnel wearing the headset can communicate
bidirectionally with any customer who is at the menu board.
bidirectionally with any customer who is at the menu board.
p You will hear a beep in the headset when a vehicle
arrives at the menu board.
When the Press-To-Talk (PTT) mode is preset
Hold down the [T1] button.
p A beep is heard from the speaker of the headset to
confirm that communication has been established.
In this state, you can talk with a customer at the
menu board by speaking into the microphone of the
headset.
In this state, you can talk with a customer at the
menu board by speaking into the microphone of the
headset.
Release the [T1] button.
p Communication is interrupted and the conversation
is ended.
When the Talk-Lock mode is preset
Press the [T1] button.
p A beep is heard from the speaker of the headset to
confirm that communication has been established.
In this state, you can talk with a customer at the
menu board by speaking into the microphone of the
headset.
In this state, you can talk with a customer at the
menu board by speaking into the microphone of the
headset.
Press the [T1] button again.
p Communication is interrupted and the conversation
is ended.
wCommunications with other
store personnel (PAGE)
Store personnel wearing the headset can communicate with
each other without being heard by customers.
each other without being heard by customers.
When the Press-To-Page (PTP) mode is preset
Hold down the [P] button.
p A beep is heard from the speaker of the headset to
confirm that communication has been established.
In this state, you can talk with a store personnel by
speaking into the microphone of the headset.
In this state, you can talk with a store personnel by
speaking into the microphone of the headset.
Release the [P] button.
p Communication is interrupted and the conversation
is ended.
When the Page-Lock mode is preset
Press the [P] button.
p A beep is heard from the speaker of the headset to
confirm that communication has been established.
In this state, you can talk with a store personnel by
speaking into the microphone of the headset.
In this state, you can talk with a store personnel by
speaking into the microphone of the headset.
Press the [P] button again.
p Communication is interrupted and the conversation
is ended.
English