Panasonic Attune II Operating Guide
13
Expose the
•
sound apertures of the Speaker Microphone from the opening of the order post.
When covering the opening with a mesh net or punching metal sheet, select the one with
relatively high aperture ratio.
Stick the Speaker Microphone with the front side of the order post without
relatively high aperture ratio.
Stick the Speaker Microphone with the front side of the order post without
•
gap.
Isolate the sound in the order post with fit-sized panels so that the sound from the unit for
•
the speaker does not leak into the area around the unit for the microphone.
Notice to avoid breakdown
Settle the connector in the way to avoid drips. Connector attached at the end of input cable is
•
not water resistant.
Do not install
Do not install
•
the unit inclining upward to prevent standing water on the unit.
Others
Do not install near the equipment or substance which are affected by magnetic field.
•
MAX 12mm
MAX 12mm
MAX 12mm
MAX 12mm
Space
Space
Fit-sized panel without
openings
openings
Bad example
Good example
Sound
leakage
leakage
Stick each unit with
the front side of the
order post without
gap
the front side of the
order post without
gap
Microphone
Speaker