Tippmann Games 98 Custom User Manual

The most common leak occurs from a bad tank o-ring.
To replace a tank o-ring you must first remove the bad
o-ring and then install a new one.  This o-ring is located
on the tip of your tank valve.

The best tank o-rings are made of urethane.  The
urethane o-rings are not affected by high CO

2

 pressures.

These may be purchased from Tippmann Pneumatics
or your local paintball dealer.

You should store you gun in a dry area.  The only parts
that can rust are the rear bolt and linkage arm. Before
storing your gun make sure that the rear bolt and linkage
arm are cleaned and oiled so that they do not rust.  Store
your gun with the bolt in the forward position.  Empty
and remove the CO

2

 tank from the gun.

When removing your gun out of storage you should re-
oil the rear bolt, linkage arm and the front bolt before
use.

16

Tippmann Pneumatics, Inc. is dedicated to providing you
with the ultimate paintball gun and the quality support
necessary for the utmost satisfaction in its use.
Tippmann Pneumatics, Inc. warrants that this product is
found free from defects in materials and workmanship
for a period of 1 year from the original date of purchase
by the initial owner/purchaser.  On claims submitted as
outlined, Tippmann Pneumatics, Inc. will repair or
replace, without charge, any of its guns that have failed
through defect in material or workmanship.

In the event warranty or other non-warranty related
repairs are required, send the product(s) to Tippmann
Pneumatics, Inc.  We strive to complete the necessary
repair work within 24 hours and return it to you via regular
ground UPS.  For assistance with warranty and repair
call 1-800-533-4831.

Note:   If you should encounter any problems with your
gun and you have aftermarket parts on your gun, please
test it with the original stock parts before sending it in.

17