Tamron Satellite Radio IC-R10 User Manual

5

SCANNING OPERATION

45

When BANK R becomes full, an
error beep sounds when trying to
set more skip frequencies.
When you want to cancel the skip
function, turn OFF the SKIP setting
in the memory channel (p. 56).

t

After set up, push [SCAN] or
[CLR] to stop scanning.

Stored frequencies are skipped dur-
ing the next full, program or auto-
memory write scan operation.

Set the skip condition in each mem-
ory channel—refer to p. 55 MEM-
ORY EDIT for details.

■

Two skip functions are available as fol-
lows:

1. Program skip function
Used with full, program and auto-mem-
ory write scans, this function allows you
to skip specified frequencies stored in
BANK R (skip function must be ON for
these channels).

2. Memory skip function
Used with memory, BANK and mode
select scans, this function allows you to
skip specified memory channels.

These are activated when 

PROGRAM

SKIP

or 

MEMORY  SKIP

is turned

ON in set mode (p. 59).
Their factory pre-programmed settings
are:

PROGRAM SKIP

: OFF

MEMORY SKIP

: ON

q

Set 

PROGRAM SKIP

to ON in

set mode (p. 59).

w

Push [V/M] to select VFO mode.
(p. 11)

e

Start full or program scan (p. 35).

4

While pushing
[FUNC], push
[

(V/M)

MW] during

scan pause if you
want to skip the
paused frequency.

Skip frequencies
are stored in
BANK-R memory
channels (count-
ing down from
channel 99 to 00).

PROGRAM  SKIP

ON