Oregon Scientific CORDLESS PHONE OS6976 User Manual
EN
Memory is available at the handset only. Store up to ten 24-digit numbers in memory for quick
dialing. This memory feature is in addition to the 40 Caller ID records that can be stored in the
Caller ID memory log.
dialing. This memory feature is in addition to the 40 Caller ID records that can be stored in the
Caller ID memory log.
1. Make sure the phone is OFF (not in TALK mode).
2. Press the mem button.
3. Press the desired memory location (0 through 9).
4. Press the mem button again. The display shows
ENTER NAME.
NOTE: If you don't want to enter the name, skip step 5.
5. Use the handset’s touch-tone pad to enter a name (up to 15 characters). More than one letter is
stored in each number key.
For example, to enter the name Bill Smith, press the two key twice for the letter B, press the
four key three times for the letter I, and press the five key three times for the letter L. After one
second, press the five key three times again for the second letter L and press the one key to
insert a space between the letter L and S. Press the seven key four times for the letter S, press
the six key once for the letter M, press the four key three times for the letter I, press the eight
key once for the letter T, and press the four key twice for the letter H.
four key three times for the letter I, and press the five key three times for the letter L. After one
second, press the five key three times again for the second letter L and press the one key to
insert a space between the letter L and S. Press the seven key four times for the letter S, press
the six key once for the letter M, press the four key three times for the letter I, press the eight
key once for the letter T, and press the four key twice for the letter H.
NOTE: If you enter a wrong letter, press channel/delete button to backspace.
6. Press the mem button to save the name. The display shows
ENTER TEL NUMBR.
7. Use the touch-tone pad to enter the area code followed by the telephone number you want
to store (up to 24 digits).
8. Press mem again to store the number. You will hear a
confirmation tone.
1. Repeat steps 1 through 7 in Storing a Name and Number in Memory.
2. Press the mem button and
REPLACE MEMO? shows in the display.
3. Press TONE*/exit to exit, or press the memory button to store the number. You will hear a
confirmation tone.
1. Repeat steps 1 through 6 in Storing a Name and Number in Memory.
2. Press the REDIAL button.
3. Press the mem button to store the number. You will hear a confirmation tone.
MEMORY
STORING A NAME AND NUMBER IN MEMORY
CHANGING A STORED NUMBER
STORING A REDIAL NUMBER
31
os6976-en1.p65
5/20/2005, 12:09 PM
34