Oregon Scientific CORDLESS PHONE OS6976 User Manual

EN

1. Repeat steps 1 through 2 in Storing a Redial Number

2. Press the mem button and 

REPLACE MEMO? shows in the display.

3. Press TONE*/exit  to exit, or press the memory button again and the redial number replaces the

old number in that memory location. You will hear a confirmation tone.

1. Make sure the phone is ON by pressing the TALK/CALLBACK button.

2. Press mem button.

3. Press the number (0-9) for the desired memory location. The number dials automatically.

OR

1. Make sure the phone is OFF (not in TALK mode).

2. Press mem button.

3. Use the CID/VOL (-) arrow or CID/VOL (+) arrow button to scroll through the numbers stored in

memory until the desired number is shown.

4. Press TALK/CALLBACK. The numbers dial automatically.

IMPORTANT: If you make test calls to emergency numbers stored in memory, remain on
the line and briefly explain the reason for the call to the dispatcher. Also, it’s a good idea to
make these calls in off-peak hours, such as early morning or late evening.

When storing information in memory, press the # pause button twice within one second to insert a
delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a
dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone).
Pause shows on the display as a 

“P. “ Each pause counts as 1 digit in the dialing sequence.

1. Press mem, then use the CID/VOL (-) arrow or CID/VOL (+) arrow button to view the

entry.

2. While the entry is displayed, press channel/delete button to delete the entry. The

display shows DELETE?

3. Press channel/delete again to delete the entry. 

DELETED shows in the display.

32

os6976-en1.p65

5/20/2005, 12:09 PM

35