Optibase MGW 2400 WMT User Manual
Chapter 3
• Operating Channels
Operating Channels
This section instructs you on transmitting and receiving WMT
channels for playback.
channels for playback.
To start playing a channel:
1. Log on to MGW 2400 EMS as Administrator or Super
User; the MGW 2400 EMS Main window appears with the
Modules page open. If you log on as Guest, you cannot
operate channels.
Modules page open. If you log on as Guest, you cannot
operate channels.
2. Click the Channels tab; the Channels page appears.
3. On the Channels page, select the desired channels and click
Play
; the selected channel starts playing. To start
all channels, click Select All
and then Play
.
To stop playing a channel:
• On the Channels page, select the desired channel and click
Stop
; the desired channel stops playing. To stop all
channels, click Select All
and then Stop
.
Note
• When using an external WMS server for transmission, it may take
several minutes until the channel starts or stops playing respectively.
• When starting or stopping channels, a window appears indicating that
the relevant command is being processed. If this window does not
close within 5 minutes, click Close
close within 5 minutes, click Close
and wait until the relevant
channels are started or stopped respectively.
91