Optibase MGW 2400 WMT User Manual

Chapter 3 

• Editing Channel Parameters 

External WMS 

<None> (default) 

No external WMS server 
is used. 

  

IP address of an external WMS 
server you may have 
configured for this channel. 

If you wish to use an 
external WMS server, 
choose the desired 
server's IP address from 
the list. This WMS server 
must belong to the same 
workgroup as MGW 2400. 
If you do not find the 
desired server's IP 
address, go to the 
External WMS page in 
order to add it to the 
Servers list. Refer to page 
64 for instructions. 

Max Clients 

0 - 10 (default is 10) 

Enter the max. number of 
clients allowed to receive 
the stream at the same 
time. 

UDP Block Size 

1024 - 20000 
(default is 0 for Automatic) 

We recommend setting 
the UDP Block Size value 
to 0 for Automatic. 
The UDP Block Size 
depends on the video and 
audio bit-rates. The 
values set by MGW 2400 
can be found at page 113. 

Host URL 

For example: 
mms://MGW2400/Test0 

This field shows when the 
channel is running. 
It displays the URL 
required to configure the 
Windows Media Player for 
playing back this channel. 
For further information on 
playing unicast streams 
and specifying the correct 
URL, refer to page 93.