Oracle Vacuum Cleaner CPU-56T User Manual

The actual memory module installation procedure is described in the

a

SPARC/MEM−550

Installation Guide

a

 which is delivered together with the memory module.

a

A hard disk is available for the CPU board on request. It can be connected to the IDE1
interface which is accessible via an on−board connector.

a

Before installing the hard disk you have to remove the I/O board and afterwards you
have to reinstall it. How this is done is described in the previous section "PMC Modules".
The actual installation of the hard disk is described in the Installation Guide delivered
together with the hard disk.

a

The SCSI−U160 cable is available as accessory kit called ACC/CABLE

*SCSI*U160. It

provides a SCSI U160 cable with a length of three meters which has one SCSI

*3 and one

SCSI

*4 connector at its ends. It can be used to connect SCSI devices to the CPU board.

For details, refer to the

a

ACC/CABLE/SCSI−U160 Installation Guide

a

 which is delivered

together with the accessory kit.

a

The RS−422 cable is available as accessory kit called ACC/CABLE

*RS*422 and

provides a serial cable with a length of 2.6 meters that has one male DSub9 RS

*422 and

one female mini DSub9 RS

*232 connector at its ends. It allows to connect RS*422

devices to the serial B interface of the CPU board. For details, refer to
the

a

ACC/CABLE/RS−422 Installation Guide

a

which is delivered together with the accessory

kit.

a

The PS/2 splitter cable can be connected to the SUN−type keyboard/mouse connecter of
the CPU board or its IOBP. It allows to operate a PS/2−style keyboard and mouse.

a