Oce North America TDS600 User Manual
Problem solving
271
Note:
If the cut sheet feed covers are still flashing on the display, re-check the
sheet feeder section.
Paper jam in the roll feed section
▼
▼
▼
▼
How to clear a jam in the roll compartments
1
Open the appropriate roll compartment.
Note:
Only one compartment can be open at a time.
2
Remove any jammed printing material from the paper path (see figure 164)
and, if necessary, pull back the paper and rewind it.
and, if necessary, pull back the paper and rewind it.
Note:
Occasionally, a jam may occur before the printing material has been
cut. In that case, you can cut the material manually by pressing the
appropriate green load button in the roll compartment.
appropriate green load button in the roll compartment.
3
Reload the roll if the system asks you to do so (see ‘Load rolls of copy
material’ on page 241).
material’ on page 241).
4
Close the roll compartment again.
Note:
If the roll feed covers are still flashing on the display, re-check the roll
feed section.
Paper jam in the manual feed
▼
▼
▼
▼
How to clear a jam in the manual feed
1
Open the manual feed by tilting it towards you (see figure 165).
[165] Opening the manual feeder
2
Remove any jammed printing material.