Nextar NCU103 User Manual
SPECIFICATION
GENERAL
Supply Voltage DC 14.4 V. Negative Ground
Current Consumption Max.15A
MAX Power Output 40Watts X 4
Number of channels 2 STEREO channels.
Unit Dimensions 178[W] X 164[D] X 50[H] mm.
Supply Voltage DC 14.4 V. Negative Ground
Current Consumption Max.15A
MAX Power Output 40Watts X 4
Number of channels 2 STEREO channels.
Unit Dimensions 178[W] X 164[D] X 50[H] mm.
FM SECTION
Frequency range 87.5MHz -107.9MHz
Effective sensitivity 3uV.
I.F Frequency 10.7MHz.
Frequency range 87.5MHz -107.9MHz
Effective sensitivity 3uV.
I.F Frequency 10.7MHz.
AM SECTION
Frequency range 530KHz - 1710KHz
Effective sensitivity 40dB.
I.F Frequency 450KHz
Frequency range 530KHz - 1710KHz
Effective sensitivity 40dB.
I.F Frequency 450KHz
RCA LINE OUT (OPTION)
Output 1200mV @ CD MAX.
Output 1200mV @ CD MAX.
CD PLAYER
System MP3 Audio System.
Suitable CDs MP3, WMA, CD, CD-R, CD-RW Disc
Frequency characteristics 20Hz-100Hz < 5dB
System MP3 Audio System.
Suitable CDs MP3, WMA, CD, CD-R, CD-RW Disc
Frequency characteristics 20Hz-100Hz < 5dB
\
10KHz-20KHz < 5dB.
\
S/N Ratio to CD 50dB [1KHz]
Page 2
LOCATION AND FUNCTION OF CONTROLS
Page 13
1. SEL( AUDIO MODE SELECT)/ROTARY VOL KNOB
(1) Press SEL button shortly and repeatedly to change the mode in the sequence as follows:
--> VOL --> BAS --> TRE --> BAL --> FAD -->
(1) Press SEL button shortly and repeatedly to change the mode in the sequence as follows:
--> VOL --> BAS --> TRE --> BAL --> FAD -->
1) VOLUME CONTROL
A. The volume level can be adjusted at any time by rotating the VOL knob as select mode
has been initially defaulted at volume mode.
B. The volume level is also obtained by stepping through the SEL button until the function
VOL is displayed and then rotate the VOL knob to adjust the sound level.
2) BASS CONTROL
A. Press the SEL button to select the bass mode until BAS appears on the display.
B. R
A. The volume level can be adjusted at any time by rotating the VOL knob as select mode
has been initially defaulted at volume mode.
B. The volume level is also obtained by stepping through the SEL button until the function
VOL is displayed and then rotate the VOL knob to adjust the sound level.
2) BASS CONTROL
A. Press the SEL button to select the bass mode until BAS appears on the display.
B. R
to adjust the bass effect.
3) TREBLE CONTROL
A. Press the SEL button to select the treble mode until TRE appears on the display.
B. Rotate
A. Press the SEL button to select the treble mode until TRE appears on the display.
B. Rotate
to adjust the treble effect.
otate the VOL knob
the VOL knob
4) BALANCE CONTROL
A. Press the SEL button to select the balance mode until BAL appears on the display.
B. Rotate the VOL knob to increase or decrease the sound level of left or right speaker.
5) FADER CONTROL
A. Press the SEL button to select the fader mode until FAD appears on the display.
B. Rotate the VOL knob to increase or decrease the sound level of front or rear speaker.
B. Rotate the VOL knob to increase or decrease the sound level of left or right speaker.
5) FADER CONTROL
A. Press the SEL button to select the fader mode until FAD appears on the display.
B. Rotate the VOL knob to increase or decrease the sound level of front or rear speaker.