Oregon Scientific WA328 User Manual
EN
02
01
GETTING STARTED
FOR FIRST TIME USE
There are some accessories provided in the package. There are two bottles (30ml capacity), two short tubes (for use with 10ml bottles, not provided) and two
long tubes (for 30ml bottle, provided).
Install the tube:
1. Lift the top of the main unit.
2. Choose the correct size tube to fit for your bottle.
3. Insert the tube securely into the slot.
Install the tube:
1. Lift the top of the main unit.
2. Choose the correct size tube to fit for your bottle.
3. Insert the tube securely into the slot.
In case the provided tubes length cannot fit for your bottles,
you may:
• Fill your essential oil into the 30ml bottles provided. Then
you can install and use with the long tubes provided in the
packaging.
Or
• Cut the tube into deserved length:
• Insert the tube into the bottle vertically unit it reaches bottom.
Cut the tube at a position that 10mm above the bottle opening.
you may:
• Fill your essential oil into the 30ml bottles provided. Then
you can install and use with the long tubes provided in the
packaging.
Or
• Cut the tube into deserved length:
• Insert the tube into the bottle vertically unit it reaches bottom.
Cut the tube at a position that 10mm above the bottle opening.
Install the bottle:
Most standard size bottles will fit the diffuser, however if your original bottle of essential oil does not fit,
you can use our provided bottle to pour the essential oil into. Install one or two bottle(s) into top slot(s),
which can be sprayed in two directions.
• Firmly twist the bottle anti-clockwise into the top slot. Ensure the
tube is long enough to reach the essential oil in the bottle.
Most standard size bottles will fit the diffuser, however if your original bottle of essential oil does not fit,
you can use our provided bottle to pour the essential oil into. Install one or two bottle(s) into top slot(s),
which can be sprayed in two directions.
• Firmly twist the bottle anti-clockwise into the top slot. Ensure the
tube is long enough to reach the essential oil in the bottle.
1. Do not dilute the essential oil with water.
2. For the best performance of the diffuser, please periodically check the volume of the essential oil
remaining in the bottle.
2. For the best performance of the diffuser, please periodically check the volume of the essential oil
remaining in the bottle.
POWER SUPPLY
The aroma diffuser is powered by connecting the power adapter (provided in the packaging).
CONNECT TO POWER SOURCE
1. Plug the small end of the power adapter into the power jack at the rear of the main unit.
2. Insert the plug from the power adapter into an electrical socket.
2. Insert the plug from the power adapter into an electrical socket.
1. Only use the power adapter supplied with this product. To order a replacement power adapter,
please contact our customer service.
2. The power adapter is intended to be correctly inserted into a vertical wall or floor mounted
power socket. The prongs are not designed to hold the plug in place if it is plugged into a ceiling,
under-the-table or in a cabinet outlet. The socket-outlet should be installed near the equipment and
should be easily accessible.
please contact our customer service.
2. The power adapter is intended to be correctly inserted into a vertical wall or floor mounted
power socket. The prongs are not designed to hold the plug in place if it is plugged into a ceiling,
under-the-table or in a cabinet outlet. The socket-outlet should be installed near the equipment and
should be easily accessible.
BATTERY INSTALLATION
The coin battery is intended for backup power use only, which can remain a basic time display and the
LCD display for setup. You cannot start the main unit without the mains power supply.
1. Use a coin to counter-clockwise open the battery compartment cover.
2. Install a new battery, CR2032 button battery (provided).
3. Replace the battery compartment cover and firmly close it in a clockwise direction.
LCD display for setup. You cannot start the main unit without the mains power supply.
1. Use a coin to counter-clockwise open the battery compartment cover.
2. Install a new battery, CR2032 button battery (provided).
3. Replace the battery compartment cover and firmly close it in a clockwise direction.
LOCATION SELECTION
Before selecting a location to place the unit, consider the following:
• Ensure there is at least 15 cm between the unit and the closest object or wall. Object may be accumulated with essential oil if direct contact with the mist
• Ensure there is at least 15 cm between the unit and the closest object or wall. Object may be accumulated with essential oil if direct contact with the mist
for a prolonged period.
• Ensure there is at least 40 cm space above the top of the unit for ventilation purposes.
• Ensure the distance between the unit and wall socket is not longer than the power cord itself.
• Avoid close with electrical appliance to the unit.
• Not recommend to place the unit beside the bed. The diffusion of aroma essential oil mist is very strong to the breath.
• Ensure there is at least 40 cm space above the top of the unit for ventilation purposes.
• Ensure the distance between the unit and wall socket is not longer than the power cord itself.
• Avoid close with electrical appliance to the unit.
• Not recommend to place the unit beside the bed. The diffusion of aroma essential oil mist is very strong to the breath.
The main unit should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed onto the main unit.
WA328 EN manual.indd 3
5/5/14 12:31 PM