Oregon Scientific WA328 User Manual
EN
04
03
SETTINGS
You can customize your required settings prior to the start of the unit diffusing.
MANUALLY SET CLOCK
To set the clock on the main unit:
1. After the power adapter is plugged in, lift the top of the main unit. Press at the
1. After the power adapter is plugged in, lift the top of the main unit. Press at the
rear of the main unit, the main unit automatically enters to clock setting mode.
2. The setting sequence is 12/24 hr format, hour and minute.
3. Press
3. Press
to change the settings slowly, or press and hold
to rapidly
change the settings.
4. Press to confirm setting.
ROOM SIZE
You can adjust the strength of the aroma according to the size of the room where the device is located. The time
interval between each spray depends on the size of the room. It usually takes approx. 5-minutes per spraying cycle.
1. Press to enter setting mode.
2. Slide
interval between each spray depends on the size of the room. It usually takes approx. 5-minutes per spraying cycle.
1. Press to enter setting mode.
2. Slide
ft
2
/
m
2
switch to select a measurement unit.
3. Press to adjust the room size; the setting sequence is 10m
2
, 20
m
2
, 30
m
2
, 40
m
2
and 50
m
2
(~100
ft
2
, 200
ft
2
, 300
ft
2
, 400
ft
2
and 500
ft
2
).
4. The setting will automatically be saved.
SPRAY THE AROMA MANUALLY
You can select a desired nozzle to spray the aroma manually.
1. Make sure the aroma oil filled into the bottle for spraying.
2. Press
1. Make sure the aroma oil filled into the bottle for spraying.
2. Press
at the top control panel to change the nozzle.
3. When selecting the nozzle, there will be a light indication on the side of the selected nozzle.
4. The setting sequence is Right Nozzle, Left Nozzle and Stop (no light).
5. The setting will automatically be saved.
4. The setting sequence is Right Nozzle, Left Nozzle and Stop (no light).
5. The setting will automatically be saved.
OIL DIFFUSION INTENSITY
You can set up your desired aroma oil diffusion intensity, you have three options.
1. Press on the top control panel to select intensity: (intensive), (medium) and (low).
2. The setting will automatically be saved.
1. Press on the top control panel to select intensity: (intensive), (medium) and (low).
2. The setting will automatically be saved.
MOOD LIGHT
Your aroma diffuser has a colourful mood light in the base of the unit. You can select
one colour or set all of the colours on a loop.
1. Press on the top control panel, you can select
one colour or set all of the colours on a loop.
1. Press on the top control panel, you can select
OFF, 01 (red), 02 (pink), 03 (orange),
04 (yellow), 05 (green), 06 (blue), 07 (purple) and LOOP. The colour will light up, as you are selecting.
2. The setting will automatically be saved.
CUSTOMIZE AROMA OIL DIFFUSION PROGRAM
You can customise two programs (
P1/P2) for two different schedule.
To activate & deactivate a program:
1. Press
1. Press
P1/P2 to activate the program. P1/P2 will be displayed on the LCD.
2. Press
P1/P2 to turn the program OFF.
To set a program:
1. To setup a program.
2. Press and hold
1. To setup a program.
2. Press and hold
P1/P2 to enter setting mode.
3. When the nozzle indicator is flashing, press to select your desired direction.
Press
Press
P1/P2 to save the setting and enter next step (aroma oil diffusion intensity setting).
WA328 EN manual.indd 4
5/5/14 12:31 PM