Kramer Electronics Home Theater Server FC-5 User Manual
16
FC-5 - Using the FC-5
6.3
Transmitting Commands via the Relays
You can use your FC-5 to transmit commands via the relays:
Figure 15: Transmitting Commands via the Relays
A PC or Remote Controller is connected to the COM1 port. Relay 1 is connected
to the blinds, and relay 2 is connected to the lighting system. On each 3-pole
terminal block connector, connect either: C to NO, or C to NC
Figure 16: Relay Pinout
C Common
NO
Normally Open (that is, the electricity is switched ON)
NC
Normally Closed (that is, the electricity is switched OFF)