Juniper Networks fi-6000NS User Manual
4.5 Sending the Scanned Data by Fax
Network Scanner fi-6000NS Operator's Guide
155
Regular User Operations
4
3. In the "Notification To (Sender’s e-Mail Address)" field, enter an e-mail address for
Send Fax result alert e-mails.
e-Mail addresses may be up to 255 characters long. One of the following e-mail address
formats must be used:
formats must be used:
• XXXXXXX@IP_address
• XXXXXXX@Host_name
• XXXXXXX@Domain_name
4. Press the [Scan&Send] button.
When [Scan Viewer] is On, this will be a [Scan] button.
⇒
Scanning starts.
After the last page is displayed on the "Scanning" screen, the scan data is sent by fax, and
the touch panel screen returns to the "Main Menu".
After the last page is displayed on the "Scanning" screen, the scan data is sent by fax, and
the touch panel screen returns to the "Main Menu".
5. Check the scanned data.
For more details about the "Scan Viewer" screen, refer to "4.9 Editing the Scanned Data in
the Scan Viewer" (page 201).
the Scan Viewer" (page 201).
XXXXXXX
Comprised of alphanumerics, hyphens (-), periods (.) and
underscores (_).
underscores (_).
IP_address
Comprised of numbers separated by periods (.).
IP addresses within the following ranges may be used:
1.0.0.1 - 126.255.255.254
128.0.0.1 - 191.255.255.254
192.0.0.1 - 223.255.255.254
IP addresses within the following ranges may be used:
1.0.0.1 - 126.255.255.254
128.0.0.1 - 191.255.255.254
192.0.0.1 - 223.255.255.254
Host_name
Comprised of alphanumerics and hyphens (-) only. Initial character
may not be a hyphen.
may not be a hyphen.
Domain_name
Name elements comprised of alphanumerics and hyphens (-) are
separated by periods (.).
Each name element may contain up to 63 characters, and only
alphabetic characters may be used for the last element.
separated by periods (.).
Each name element may contain up to 63 characters, and only
alphabetic characters may be used for the last element.
HINT
•
"Scan Viewer" is initially "Off".
•
When the [Scan] button is pressed (when [Scan Viewer] is "On"), each
page is briefly shown on the screen as it is scanned.
page is briefly shown on the screen as it is scanned.
When the scan has completed, the "Scan Viewer" screen opens.
For more details about Scan Viewer, refer to "4.8 Enabling/Disabling the
Scan Viewer" (page 198)" and "4.9 Editing the Scanned Data in the Scan
Viewer" (page 201).
For more details about Scan Viewer, refer to "4.8 Enabling/Disabling the
Scan Viewer" (page 198)" and "4.9 Editing the Scanned Data in the Scan
Viewer" (page 201).