Juniper Networks fi-6000NS ユーザーズマニュアル

4.5 Sending the Scanned Data by Fax

Network Scanner fi-6000NS Operator's Guide 

155

Regular User Operations

4

3. In the "Notification To (Sender’s e-Mail Address)" field, enter an e-mail address for

Send Fax result alert e-mails.

e-Mail addresses may be up to 255 characters long. One of the following e-mail address 
formats must be used:

• XXXXXXX@IP_address

• XXXXXXX@Host_name

• XXXXXXX@Domain_name

4. Press the [Scan&Send] button.

When [Scan Viewer] is On, this will be a [Scan] button.

⇒

Scanning starts.
After the last page is displayed on the "Scanning" screen, the scan data is sent by fax, and 
the touch panel screen returns to the "Main Menu".

5. Check the scanned data.

For more details about the "Scan Viewer" screen, refer to "4.9 Editing the Scanned Data in 
the Scan Viewer" (page 201).

Comprised of alphanumerics, hyphens (-), periods (.) and 
underscores (_).

IP_address

Comprised of numbers separated by periods (.).
IP addresses within the following ranges may be used:
1.0.0.1 - 126.255.255.254
128.0.0.1 - 191.255.255.254
192.0.0.1 - 223.255.255.254

Host_name

Comprised of alphanumerics and hyphens (-) only. Initial character 
may not be a hyphen.

Domain_name

Name elements comprised of alphanumerics and hyphens (-) are 
separated by periods (.).
Each name element may contain up to 63 characters, and only 
alphabetic characters may be used for the last element.

HINT

•

"Scan Viewer" is initially "Off". 

•

When the [Scan] button is pressed (when [Scan Viewer] is "On"), each 
page is briefly shown on the screen as it is scanned.

When the scan has completed, the "Scan Viewer" screen opens.
For more details about Scan Viewer, refer to "4.8 Enabling/Disabling the 
Scan Viewer" (page 198)" and "4.9 Editing the Scanned Data in the Scan 
Viewer" (page 201).