Jabra SP-CEIL-006 User Manual

 3 

Complete the following steps to install the projector mount and projector 

to your wall. (F

 4) 

Note: Look at the bottom of the swivel bracket (G) and locate the arrow. 

Make sure you install the projector mount with the arrow pointing toward 

your screen.  

15.  Use the Allen wrench to remove the upper plate (E) from the swivel 

bracket (G). 

16.  Use the Allen wrench to remove the two screws from the enclosed 

end of the of the suspension adapter (N), and place it (N) into the 

slotted extension on the upper plate (E). Make sure that the two (2) 
outer holes on the suspension adapter (N) align with the holes on 

the slotted extension on the upper plate (E). 

17.  Screw the two screws removed in step 2 into the two (2) holes to 

secure the suspension adapter (N) to the upper plate (E). 

18.  Attach the swivel bracket (G) to the suspension adapter (N) and 

secure them with two screws removed in step 1.  

19.  Secure the upper plate (E) to the wall (M) using the commercially 

available hardware (F) suitable for your environment. Be sure that 
the swivel bracket (G) arrow is pointing toward your screen.  

20.  Carefully raise the projector (C) with the mounting bracket (B) 

attached and insert it into the bottom of the swivel bracket (G) by its 

tabs.  

21.  Rotate the projector (C) with the mounting bracket (B) attached 

180º

 

so that the projector’s focus rings is pointing toward your 

screen. 

22.  Align the safety screw (H) on the swivel bracket (G) with the end of 

the arrow -shaped slot on the mounting bracket (B) and screw it 
through the opening to prevent further rotation. Hand-tighten the 

screw (H). 

23.  Hand-tighten the remaining two clamp screws (J) to secure the 

mounting bracket (B) to the swivel bracket (G). 

Check all of the hardware for proper tightness and security. Do not over-

tighten the screws. 

 

 

 

 

 

 

 

 

 

 

 

 4