Mustek PP7000-II User Manual

 

speed by adjusting an internal switch describe in last chapter of 
the manual. 

Paper is jammed inside the printer – Turn off the printer 

and open the print hood by releasing the hood lock. Remove the 
jammed paper and reinstall the paper roll. Close the hood properly 
and firmly. Then turn on the printer for operation. 

If the auto cutter is jammed, the print hood will be locked. 

Please first resolve the auto cutter problems per description in 
next item and then come back to deal with the paper jam. Never 
force open the print hood. Please also clear away any 
contaminants accumulated in the cutter track above the thermal 
elements. 

 

Auto Cutter Track 

Thermal Elements 

In case any foreign materials like a staple or paper clip or 

excessive paper scraps fall into the auto cutter mechanism the 
auto cutter may lock up and so does the print hood. In such case, 
please pull the cutter cover forward to expose the cutter 
mechanism. Apply some mechanical assistance below to reset the 
cutter blade back to its home position. Please lift up if exist a 
transparent protective cover over the adjustment wheel. Turn this 
wheel downward. When the cutter blade returns to its standard 
position, a hole in the plastic gear will show up in the window as 
illustrated below. Then aim the guide of the cutter cover and push 

 

3 - 4