Multi-Tech Systems MULTIVOIP MVP210/410/810 User Manual

Chapter 3: Software Installation 

Multi-Tech 

Systems, 

Inc. 

     

 

 

29 

•  Select Outbound Phone Book 

o

  Select Add Entry 

o

  Accept Any Number may be selected to allow unmatched destinations an alternative 

o

  Enter the number necessary to get out from the PBX system followed by the calling code of the 

destination in the Destination Pattern field 

o

  Enter the PBX access digit (same number as needed to get out of the PBX system) in the 

Remove Prefix field 

o

  Any digits that need to be added should be put in the Add Prefix field 

o

  Enter the IP address of the call destination (add a Description if you like) 

o

  Select a Protocol type (–SS models use SIP only, -FX models do not support H.323) 

ƒ

 For 

H.323: 
•  Enter Gateway settings 

ƒ

 For 

SIP: 
•  Select Transport Protocol, Proxy and URL if needed 

ƒ

 For 

SPP: 
•  Enter Registrar settings if needed 

o

 The 

Advanced Button will allow an Alternate IP Address to be entered for outbound traffic 

•  Select Inbound Phone Book 

o

  Select Add Entry 

o

  Accept Any Number for inbound traffic does not work when external routing devices are used 

o

  Enter any access digits followed by the local calling code in the Remove Prefix field 

o

  Enter any digits needed to access an outside line in the Add Prefix field 

o

  Select Hunting in the Channel Number field to have the VOIP use the next available channel 

o

  Add a description if you like 

o

  Call Forward may be set up (details available in Chapter 5) 

o

  Select Registration Option 

•  Repeat the Phone Book steps for any additional entries needed 

Any time that you change settings on the VOIP unit, you must choose the Save & Reboot option; otherwise all 
changes made will be lost when the MultiVOIP is reset or shutdown.