Miele Burner CS 1112 E User Manual
Product and Cut-out Dimensions
Page 3 of 4
CS 1112 E Ceramic Double Burner CombiSet
CS 1112 E Ceramic Double Burner CombiSet
The illustration above represents the attachment of spring clips 1 and support bars 2 for 3
appliances
appliances
Spring Clip installation
on wood or solid
surface countertop
Place the supplied
spring clips 1 and the
on wood or solid
surface countertop
Place the supplied
spring clips 1 and the
Spring Clip installation
on a granite
countertop
Position and attach
the spring clips 1 and
on a granite
countertop
Position and attach
the spring clips 1 and
An additional support bar is required for each additional appliance. The position for the
attachment of an additional support bar depends on the width of appliance B.
attachment of an additional support bar depends on the width of appliance B.
spring clips 1 and the
support bars 2 at the
marked positions as
shown above, by
laying them on the
upper edge of the cut-
out and then securing
them with the 1/8” x 1”
support bars 2 at the
marked positions as
shown above, by
laying them on the
upper edge of the cut-
out and then securing
them with the 1/8” x 1”
the spring clips 1 and
the support bars 2
with strong double-
sided tape 3
Coat the side and
lower edges of the
spring clips with
silicone.
the support bars 2
with strong double-
sided tape 3
Coat the side and
lower edges of the
spring clips with
silicone.
Location Codes
1 – Spring Clips
2 – Support bars (Accessory, item - 27996029D CSZL 1500 (Includes cover 4))
(3.5 x 25 mm) screws
(supplied)
(supplied)
Fill the space between
the support bars and
the countertop with
silicon
the support bars and
the countertop with
silicon
3 – Space between support bar and countertop
4 – Cover
Notes
All installations must be done in accordance with local codes.
Drawing is not to scale
Specification Sheets OJS 02212012