Measurement Specialties 9116 User Manual

Pressure Systems, Inc.                                                                                        Model 9116 User’s Manual 
 
 

 

Page 81 

 

www.PressureSystems.com 

Type 

00 

Re-zero Cal Adjustment (offset) term 

   (Note 1) FLOAT 

01 

Span Cal Adjustment (gain) term   

   (Note 2) FLOAT 

07 

User Defined Field 

 

 

 

   (Note 4) INTEGER 

09 

Transducer Manufacturing Reference Number (Note 5) INTEGER 

0A 

Transducer Full-Scale Range Code (See Appendix F) (Note 5) INTEGER 

 
 

(Note 1) 

Related command ‘w08’ can be used to download the offset term to the  
sensor’s non-volatile memory (digitally or non-digitally compensated sensor). 

 
 

(Note 2) 

Related command ‘w09’ can be used to download the gain term to the 
sensor’s non-volatile memory (digitally or non-digitally compensated sensor). 

 
 

(Note 4) 

Data is immediately stored to the sensor’s non-volatile memory. 

 
 

 

 The 

User Defined Date field (cc=07) is a 32-bit integer. Possible uses are to I

  ndicate the date of last user zero and/or span calibration or possibly the date of  
  next required calibration.  If this optional field is used, the user is responsible for  
  correctly encoding the date into the appropriate 32-bit integer value e.g., a  
  decimally encoded ‘yymmdd’ date.  Any modifications of this field (using the  
  Download Internal Coefficients (‘v’) command) will result in the new value  
  automatically being entered to transducer non-volatile memory. 

 
  A 

special 

single 

Other Coefficients array is selected with array index aa=11 

 (hex).  All the valid coefficient indexes (for this array only) are listed in the  

  following 

table: 

 
 

Type 

01 EU 

Pressure Conversion scaler (default=1.0) 

FLOAT