Lynx D AD 3220 B User Manual

Reference Manual D AD 3220 B Version 1.0

Page 16

Switch Function Detail

All settings are stored in Flash Ram inside the
module (see Auto Store section in this manual).

Settings will be recalled on power up.

Dip Switch 1
This switch enables local control using the dip-

switches. ON enables local control and makes

selections on the dipswitch active, and OFF
disables local control (locking out any local

changes)

Note.

When Switch 1 is initially switched to ON, the static
settings currently set on the dip-switches may not

reflect the actual configuration stored in the

module. This is because all settings can be
changed from the remote control system or via the

Service Adapter. This overrides the local dip

switches regardless of Switch 1 ON/OFF setting. To
ensure the module reads the local dip switch

settings it is recommended to toggle Switch 1 ON-

OFF-ON before making any local changes to the
dip switches

Dip Switch 2
This switch selects the mode of operation for the

module. ON selects dual 1 into 4 mode where each
individual AES input is distributed to four outputs.

OFF selects 1 into 8 mode where input AES in 1 is

distributed to all 8 outputs.

Dip Switch 3
This is not used

Dip Switch 4
This is not used