Lynx D AD 3220 B User Manual
Reference Manual D AD 3220 B Version 1.0
Page 15
Multiple Units
When installing multiple MiniModule units it is
recommended you use the R FR 3005 Rack Frame 1
recommended you use the R FR 3005 Rack Frame 1
and / or R FR 3010 Rack Frame 2 options. Please
refer to the documentation supplied with these
options for details on electrical installation.
options for details on electrical installation.
Settings and Control
The D AD 3220 B is configured via the integral 4-
position dip-switch. This is located on the bottom of
the module and can be accessed through the
the module and can be accessed through the
cutout provided (fig 2)
1 2 3 4
DIP Switch
ON
OFF
LED 2
LED 1
Channel 1 Status
Channel 2 Status
Switch Settings
Below the switch settings for the 4-position dip-
switch are defined. Please see the section following
switch are defined. Please see the section following
the table for more detail on the switch function.
Switch
Setting
Function
ON Enable
Local
Adjustment
1
OFF Disable
Local
Adjustment
ON
Dual 1 > 4 mode
2
OFF
Single 1 > 8 mode
ON Not
Used
3
OFF Not
Used
ON Not
Used
4
OFF Not
Used