Lucent Technologies Definity Enterprise Communication Server 8.2 User Manual

Issue 1

April 2000

Screen reference 

732

IP Trunk Configuration Manager 

The Dial/Routing Plan dialog box controls:

■

how the IP trunk application manipulates the digits it receives for outgoing 
and incoming calls

■

the IP addresses to which outgoing calls are routed

■

the remote sites that can access the DEFINITY ECS application on your 
switch

The Dial/Routing Plan dialog box contains the following parameters:

ITS Servers

Displays a list of the switches that you have designated as members 
of the IP network.

Routing Info - 
Originating Dial 
Plan

■

Entry Type: Sets whether or not an outgoing call is accepted.
Valid values: 

or 

. If you set this to reject, users 

cannot make outgoing calls over the DEFINITY ECS 
application.

■

Line Number: In non-DCS configurations, enter Any. 
For DCS networks, specify the trunk group number for calls that 
originate at this switch. The trunk group number must match the 
trunk group number at the terminating switch.

■

Search Digits: Used for call routing. See the Dial/Routing Plan 
Worksheets.

■

Replace Digits: Used for call routing. See the Dial/Routing Plan 
Worksheets.

■

Destination Type: Sets the type of remote destination.
Valid entries:

, and 

.

■

Destination IP: The IP address of the remote switch.

■

Port: Used to set the (remote destination) LAN port number. If 
the Destination Type is ITS R1.0 or ITS R1.2, the default is 5000.
Do not change the default port number unless you are certain that 
the remote destination has different port settings to accept calls.