Lucent Technologies Medical Alarms Release 3 Version 8 User Manual

3

After the switch is re-administered for R3V8 and the HA dual C-LAN 
option and CMS data collection is started on the new HA server, migrate 
CMS historical data to the new HA server.

3

This procedure migrates CMS historical data from the second 
incremental maintenance backup (

) onto the new HA server.

Attempting to migrate CMS data more than once may cause catastrophic 
errors from which recovery is difficult. Before a re-migration of data can 
be performed,  CMS must be turned off and a second setup of the CMS 
software must be performed.

1. Install the incremental maintenance backup tape (which contains 

incremental historical data) into the tape drive on the new HA server.

2. Select the 

System Setup

 -> 

R3 Migrate Data 

option from the 

CMS main menu.

The 

System Setup: R3 Migrate Data

  window is displayed.

3. Select 

Historical data

 as the the data type, and 

specify All 

ACDs

 for migration, as shown in the following example:

4. Press Enter to access the action list in the top right corner of the 

window.

5. Select

 

the 

Run 

option and press Enter. 

x