Lucent Technologies Medical Alarms Release 3 Version 8 User Manual

1

The HA option is supported only for CMS servers using CMS software 
version R3V8, or later. With a few exceptions (noted below), software 
configurations for the HA primary and secondary servers are identical, 
and also correspond to the standard (non-HA) CMS software 
configuration. Also (with the exceptions listed below) a complete set of 
CMS R3V8 software packages is provided for the second server on CD 
media at no additional charge. For a complete list of required and 
optional software packages for CMS R3V8, see Chapter 1 in “

CentreVu 

Call Management System Software Installation and Setup (585-210-
941)”

.

For primary and secondary servers deployed in HA systems, the 
following exceptions to the standard CMS R3V8 software configurations 
apply: 

X.25 software is not supported as the final connection link between 
the switch and the HA servers (X.25 can be used to connect remote 
switches to an onsite switch)

CentreVu Internet Call Center is never installed on the secondary 
server.

If one or more network terminal servers are linked to the primary 
server and NTS installation is required for the secondary server, 
then the 

Bay Networks Annex R10.0B software package provided 

for the primary server can also be installed on the secondary server.

If the optional 

INFORMIX

*

 ISQL software package is installed on 

the primary server, a second licensed copy of the software must 
also be purchased by the customer for use on the secondary server.

If the optional 

Openlink Open Database Connectivity (ODBC) 

software package is installed on the primary server, a second 
licensed copy of the software must also be purchased by the 
customer for use on the secondary server.

*

INFORMIX is a registered trademark of Informix Software, Inc.