LSI MegaRAID(R) 6 Gb/s SAS RAID Controllers 25083 User Manual
MegaRAID 6Gb/s SAS RAID Controllers User’s Guide
2-1
Copyright © 2009 by LSI Corporation. All rights reserved.
Chapter 2
MegaRAID SAS
Hardware Installation
MegaRAID SAS
Hardware Installation
This chapter describes the procedures you can follow to install the
MegaRAID 6Gb/s Serial Attached SCSI/Serial ATA II controllers with
internal and external connectors. It consists of the following sections:
MegaRAID 6Gb/s Serial Attached SCSI/Serial ATA II controllers with
internal and external connectors. It consists of the following sections:
•
•
•
•
•
2.1
Requirements
The following items are required to install a MegaRAID 6Gb/s SAS RAID
controller:
controller:
•
A MegaRAID SAS 92xx RAID controller
•
A host system with an available x8 PCI Express 2.0 slot
Note:
These controllers also work in PCI Express first generation
slots. The PCI Express software is backward compatible
with previous revisions of the PCI bus and the PCI-X bus.
slots. The PCI Express software is backward compatible
with previous revisions of the PCI bus and the PCI-X bus.
•
The MegaRAID Universal Software Suite CD, which contains the
drivers and documentation
drivers and documentation
•
The necessary internal cables, external cables, or both
•
SAS drives or SATA II drives
Note:
LSI strongly recommends using an uninterruptible power
supply.
supply.