Linksys BUSINESS SPA932 User Manual
Linksys SPA9x2 Phone Administration Guide
105
Dial Plan Parameters
Customizing SPA9x2 Extensions
Dial Plan Parameters
You can configure a dial plan with three interdigit timers:
•
Initial timeout (T)—Handset off hook; no digit pressed yet.
•
Long timeout (L)—One or more digits pressed, more digits needed to reach a valid
number (as per the dial plan).
number (as per the dial plan).
•
Short timeout (S)—Current dialed number is valid, but more digits would also lead to a
valid number.
valid number.
DTMF Process AVT
Select yes to process RTP DTMF events. Otherwise, select no. If
this parameter is set to no, the AVT payload type is not included
in outbound SDP.
Defaults to yes.
this parameter is set to no, the AVT payload type is not included
in outbound SDP.
Defaults to yes.
Silence Supp Enable
To enable silence suppression so that silent audio frames are not
transmitted, select yes. Otherwise, select no. See
transmitted, select yes. Otherwise, select no. See
.
Defaults to no.
DTMF Tx Method
Select the method to transmit DTMF signals to the far end: InBand,
audio video transport (AVT), INFO, Auto, InBand+INFO, or AVT+INFO.
InBand sends DTMF using the audio path. AVT sends DTMF as AVT
events. INFO uses the SIP INFO method. Auto uses InBand or AVT
based on the outcome of codec negotiation.
audio video transport (AVT), INFO, Auto, InBand+INFO, or AVT+INFO.
InBand sends DTMF using the audio path. AVT sends DTMF as AVT
events. INFO uses the SIP INFO method. Auto uses InBand or AVT
based on the outcome of codec negotiation.
Defaults to Auto.
Parameter
Description