Linksys BUSINESS SPA932 User Manual
Linksys SPA9x2 Phone Administration Guide
121
Monitoring the SPA932
Using the SPA932 Sidecar
Monitoring the SPA932
To display the status of the SPA932, click the SPA932 Status link on the SPA932 tab. The status of
each sidecar attached (Unit 1 and Unit 2) is shown. Parameters are read-only.
each sidecar attached (Unit 1 and Unit 2) is shown. Parameters are read-only.
SPA932 Unit Monitoring Notes
The following table describes each parameter; both units display the same parameters.
Unit 1 Key 1-32
Enter a strings that define the extension and other parameters
associated with each lighted button on the first SPA932 unit.
Keywords and values are case-sensitive. The configuration
script is described in
associated with each lighted button on the first SPA932 unit.
Keywords and values are case-sensitive. The configuration
script is described in
Parameter
Description
Unit Enable
Displays if the Unit is enabled or disabled.
Subscribe Expires
Displays when the current subscription expires. After the
subscription expires, the SPA932 automatically requests a new
subscription.
subscription expires, the SPA932 automatically requests a new
subscription.
HW Version
Displays the version of the hardware.
Unit Online
Displays whether the unit is connected or not.
Subscribe Retry Interval
Displays the length of time the SPA932 waits to try again if
subscription fails.
subscription fails.
SW Version
Displays the version of the software currently running on the
unit.
unit.
Key Name
Displays the name assigned to each key (1-32) on the SPA932
sidecar unit.
sidecar unit.
Type
Displays the function enabled for each key (1-32) on the
SPA932 sidecar unit.
SPA932 sidecar unit.
Parameter
Description