Linksys BUSINESS SPA932 User Manual

Linksys SPA9x2 Phone Administration Guide

175

Since two G.723.1/G.726 resources are available per SPA9x2, you should disable the use of 
G.729a to guarantee support for two simultaneous G.723/G.726 codecs.

The default dial plan script for each line is as follows: (*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-
9]xxxxxx|xxxxxxxxxxxx.). For more information, see 

This section describes the fields for the following headings on the User tab:

Parameter

Description

Dial Plan

Dial plan script for this line.

The dial plan syntax is expanded in the SPA to allow the 
designation of three parameters to be used with a 
specific gateway:

•

uid – the authentication user-id

•

pwd – the authentication password

•

nat – if this parameter is present, use NAT 
mapping

Each parameter is separated by a semi-colon (;).

Furthermore, it recognizes gw0, gw1, …, gw4 as the 
locally configured gateways, where gw0 represents the 
local PSTN gateway in the same unit.

Example 1:

*1xxxxxxxxxx<:@fwdnat.pulver.com:5082;uid=jsmith;pwd=
xyz

Example 2:

*1xxxxxxxxxx<:@fwd.pulver.com;nat;uid=jsmith;pwd=xyz

Example 3:

[39]11<:@gw0>

Enable IP Dialing

Enable or disable IP dialing.

Defaults to no.