Linksys BUSINESS SPA932 User Manual
Linksys SPA9x2 Administration Guide
187
Configuring a Dial Plan
Dial Plans
Dial Plan parameters contain the actual dial plan scripts for each line (extension)
n
, where
n
is a number from 1 to 4 on the SPA942 and 1 to 6 on the SPA962..
The Dial_Plan[n] for Each Line
The Dial_Plan[n] for Each Line
n
defaults to:
(*xx | [3469]11 | 0 | 00 | <:1408>[2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011x. )
The default dial plan script for each line is as follows:
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxx|xxxxxxxxxxxx.).
If IP dialing is enabled, one can dial [user-id@]a.b.c.d[:port], where ‘@’, ‘.’, and ‘:’ are dialed by
entering *, user-id must be numeric (like a phone number) and a, b, c, d must be between 0 and
255, and port must be larger than 255.
entering *, user-id must be numeric (like a phone number) and a, b, c, d must be between 0 and
255, and port must be larger than 255.
If port is not given, 5060 is used. Port and User-Id are optional.
If the user-id portion matches a pattern in the dial plan, then it is interpreted as a regular phone
number according to the dial plan. The INVITE message, however, is still sent to the outbound
proxy if it is enabled.
number according to the dial plan. The INVITE message, however, is still sent to the outbound
proxy if it is enabled.