Laplink MN-LGD011-XX-US User Manual
161
Checklist for Internet connections
The computer you want to connect to must have its In-
ternet address published by an Internet directory, and
you must know what the address is
Connect over Internet is designed for connecting to a com-
puter whose Internet address is “published” to the LapLink
IILS server. To set up the computer for this kind of connec-
tion, click Internet Directory Options (Options menu) and
type an e-mail address or other unique identifier to be pub-
lished as the computer’s Internet address. Let other LapLink
users connect by sharing the address with them.
TIP Set up Internet Directory Options to have the address
published automatically. Or publish the address yourself,
when you are online: on the Connect menu, click Publish
My Internet Address.
TIP If you are connecting to a computer whose IP address
you know, use Connect Over LAN (Network) instead to sup-
ply the IP Address.
ternet address published by an Internet directory, and
you must know what the address is
Connect over Internet is designed for connecting to a com-
puter whose Internet address is “published” to the LapLink
IILS server. To set up the computer for this kind of connec-
tion, click Internet Directory Options (Options menu) and
type an e-mail address or other unique identifier to be pub-
lished as the computer’s Internet address. Let other LapLink
users connect by sharing the address with them.
TIP Set up Internet Directory Options to have the address
published automatically. Or publish the address yourself,
when you are online: on the Connect menu, click Publish
My Internet Address.
TIP If you are connecting to a computer whose IP address
you know, use Connect Over LAN (Network) instead to sup-
ply the IP Address.
Both computers must be on the Internet and running
LapLink
It doesn’t matter how it’s done—by dialing in to an ISP or
connecting over a high-speed connection—but both com-
puters must be connected to the Internet before they can
connect using Connect over Internet. LapLink must be run-
ning on both computers.
LapLink
It doesn’t matter how it’s done—by dialing in to an ISP or
connecting over a high-speed connection—but both com-
puters must be connected to the Internet before they can
connect using Connect over Internet. LapLink must be run-
ning on both computers.
Enable a TCP/IP port in LapLink
To connect over the Internet in LapLink, a TCP/IP network
port must be enabled—that is, made available for use in
LapLink. To enable a TCP/IP port in LapLink, click Port Set-
up (Options menu). Click TCP/IP in the Ports list and then
check the Enable Port box.
To connect over the Internet in LapLink, a TCP/IP network
port must be enabled—that is, made available for use in
LapLink. To enable a TCP/IP port in LapLink, click Port Set-
up (Options menu). Click TCP/IP in the Ports list and then
check the Enable Port box.
Check the security setup on the host computer
If you receive a “not authorized” error message, be sure to
change the security setting on the host from the default of
“Private System”. Access security settings from the Options
menu, then choose Security. To learn more about allowing
connections, go to chapter
If you receive a “not authorized” error message, be sure to
change the security setting on the host from the default of
“Private System”. Access security settings from the Options
menu, then choose Security. To learn more about allowing
connections, go to chapter
.
Internet connections between computers behind fire-
walls may require special configuration
Without proper configuration, LapLink connections over the
Internet may be prevented if either of the computers is be-
hind a firewall or router. This may be a personal router appli-
ance, or a corporate network’s firewall.
To facilitate LapLink connections over the Internet, LapLink
has registered port 1547 with the Internet Assigned Num-
bers Authority. This port is used by the host computer. To al-
low LapLink connections through a firewall, a network
administrator should forward port 1547 to the internal (pri-
vate) IP Address of the LapLink Gold computer behind the
firewall or router.
NOTE If you have any questions about your corporate
network, consult your network administrator.
walls may require special configuration
Without proper configuration, LapLink connections over the
Internet may be prevented if either of the computers is be-
hind a firewall or router. This may be a personal router appli-
ance, or a corporate network’s firewall.
To facilitate LapLink connections over the Internet, LapLink
has registered port 1547 with the Internet Assigned Num-
bers Authority. This port is used by the host computer. To al-
low LapLink connections through a firewall, a network
administrator should forward port 1547 to the internal (pri-
vate) IP Address of the LapLink Gold computer behind the
firewall or router.
NOTE If you have any questions about your corporate
network, consult your network administrator.