Hughes DW6000 User Manual

You need all the items shown in Figure 60. Everything but the 
Ethernet cable is in the DW6000 installation kit or inside the 
antenna box. 

If Web commissioning is not available, you must Hyperterminal 
to access the installer console and use it to configure the unit. See 
Appendix C – Installing the DW6000 using Installer Console, on 
page 95. 

You will also need the installation specification or work order. 
This is provided to you by HNS.

It is important to understand that there are four service options: 
consumer, small office/home office, enterprise, and GM 
Teleworker (not in use). Each option has its own registration 
server that appears in the Websetup Welcome screen when you 
start Websetup to register a customer. 

You must choose the consumer option when commissioning a 
DW6000. If in doubt consult the work order. 

For example, if you are installing a DW6000 you would 
double-click on the registration server for a consumer installation. 
If you click on one of the other servers, you will not be able to 
install the customer correctly.

It is also important to understand that when the Antenna Pointing 
screens first appear in Websetup, you must place a check in the 
checkbox to confirm you are performing a DW6000 installation.

Insert the disk containing the customer PC qualification tool in 
the customer computer.  Run all the checks in to tool to ensure the 
customer’s computer is set up to work with the DW6000.

The tool does not work on a MacIntosh computer.