Hughes DW6000 User Manual

The DW6000 installer’s computer software is basically 
DIRECWAY 4.0 software with some functions, such as 
interacting with a browser, removed. It is used to run Websetup 
and commission the customer. 

There are four registration servers, one each for consumer, small 
office/home office, enterprise, and GM Teleworker. Before you 
select the registration server, check the work order and confirm 
which service option the customer has chosen.

You will register the customer, peak the satellite signal, connect 
the customer’s DW6000, and confirm that they can surf the 
Internet.

1.  Connect the installer laptop PC to an analog telephone line 

or alternate connection to the Internet.

2. Select 

→ Programs→ Direcway Installer→ Websetup

. The 

Welcome

 screen appears. Check the work order for the 

service option and highlight the proper registration server. 
Then select Next. Follow the instructions on subsequent 
screens; the instructions below will supplement the onscreen 
instructions.
If the 

Welcome

 screen does not appear, there is a problem 

with the DW6000 installation. Check cable connections. If 
cable connections are not the problem, restart the PC. If that 
does not solve the problem, call installer support.

Figure 69: Welcome screen; choose proper registration server