Hughes DW6000 User Manual
Chapter 2 • Installing the indoor equipment
1033295-0001 Revision 2
31
If the customer cannot surf Configure the installer laptop so its network properties match
those of the customer’s PC. Refer to Appendix D for detailed
instructions for setting network properties. Then:
instructions for setting network properties. Then:
1. Connect the installer laptop and DW6000 with Ethernet
cable.
2. Start a Web browser on the installer laptop.
3. Enter the DW6000 IP address or 192.168.0.1 or
3. Enter the DW6000 IP address or 192.168.0.1 or
www.direcwaysupport.com in the browser URL location bar
and press Enter. If the DW6000 is functioning, the System
Control Center appears.
and press Enter. If the DW6000 is functioning, the System
Control Center appears.
4. Enter myDIRECWAY.com or some other known site in the
browser URL location bar and press Enter. If the site appears,
the DW6000 is functioning. The problem probably exists on
the customer’s computer. The customer’s network properties
may not be configured properly, or there may be some other
system problem. The customer should consult the contact
information from the System Control Center Help pages to
get technical support.
the DW6000 is functioning. The problem probably exists on
the customer’s computer. The customer’s network properties
may not be configured properly, or there may be some other
system problem. The customer should consult the contact
information from the System Control Center Help pages to
get technical support.
Figure 35: Final configuration
Transmit cable
(Satellite Out)
(Satellite Out)
AC power
cord
cord
Ethernet
cable
cable
E
th
ernet
Receive cable
(Satellite In)
(Satellite In)
Power
supply
supply
DC power
cord
cord