Husqvarna Grinder SG13B User Manual

SAFETY

HUSQVARNA

-13

Never make adjustments with the engine running.

• 

Disengage the drive units, shut off the engine and 

• 

wait until all moving parts come to a complete 

stop before making adjustments, performing 

maintenance or cleaning the machine.
Disconnect the spark plug cable before beginning 

• 

repair work. 
Keep all components in serviceable condition and 

• 

make sure all nuts, bolts and other hardware are 

tight. Replace worn or damaged decals.
Be careful when checking work tools. Use gloves 

• 

when performing maintenance work.
Never allow persons not trained in the use of the 

• 

machine to perform service on it.
Always park the machine on even ground before 

• 

performing maintenance or making adjustments.
Do not disassemble the engine. This can 

• 

invalidate the engine warranty. Contact the dealer 

for questions regarding service or guarantee 

matters. Follow all maintenance instructions.
Do not change the setting of governors and avoid 

• 

running the engine with overly high RPM. If the 

engine is run too fast, damage to the machine 

components can occur.
Do not modify safety equipment. Check regularly 

• 

to be sure it works properly. The machine must 

not be run with defective or disassembled safety 

equipment.
The muffler is designed to maintain sound levels at 

• 

an approved level and keep direct exhaust away 

from the user. Exhaust gases from the engine are 

extremely hot and may contain sparks that can 

cause fires or burn the user.
Never use a machine with a defective muffler.

• 

Reduce the risk of fire by removing grass, leaves 

• 

and other debris that may have caught in the 

machine. 

8011-027

8011-210c