Husqvarna Grinder SG13B User Manual

SET-UP

HUSQVARNA

-15

Remove crate top and sides.

1. 

Remove upper handle bar assembly and lay aside.

2. 

Open bag containing loose hardware.

3. 

Using four (4) screws, flat washers and nuts attach 

4. 

the upper handle bar assembly to lower handle 

bar assembly.
NOTE: Handle fit is tight. When aligning holes use 

a tapered type pilot to help align holes (i.e. punch 

or phillips style screw driver).
Attach the position adjusting rod to bracket on the 

5. 

upper handle bar assembly with the washers and 

cotter pins placed above the rod bracket. Attach 

the lower adjustment bar to the unit and secure 

with cotter pin.

LOWER

HANDLE BAR

ADJUSTING ROD

WASHERS

SPRING

WASHERS

YOKE

BRAKE 

HANDLE

BRAKE ROD ASSEMBLY

COTTER PINS

UPPER HANDLE BAR

Assemble the compression spring, two (2) flat 

6. 

washers and yoke to brake rod assembly. 
Screw yoke onto the rod assembly until rod is 

7. 

even or through threaded portion of yoke about ¼" 

(6.35 mm).

Attach brake rod assembly to brake handle on the 

8. 

upper handle bar assembly.

NUT