High End Systems DL.2 User Manual
CHAPTER 11
Global Functions
108
DL.2 Digital Light User Manual
Global Effect Mode 1 and Effect Mode 2
There are two Global Effect Mode parameters, each with three modifier parameters. Both
Effect Mode parameters have an identical list of color and visual effect options. This lets you
apply a dual-effect combination to the composite image.
Effect Mode parameters have an identical list of color and visual effect options. This lets you
apply a dual-effect combination to the composite image.
The table below describes the interaction between an Effect Mode parameter and the three
associated Modifier parameters for each option. You can find a detailed description of each
option in Chapter 13: Effect Mode Options Descriptions.
associated Modifier parameters for each option. You can find a detailed description of each
option in Chapter 13: Effect Mode Options Descriptions.
Note:
Modifier channels for Effect Mode 1 are labeled as CMY in the Wholehog 3
system so you can also make use of the color picker, HSI, and other
Wholehog 3 functions. Use the CMY parameter controls to adjust the three
Effect Mode 1 Modifier parameters for both the Global and Graphic fixture
types.
The default for Effect Mode 1 is set to CMY1 as well. Effect Mode 2 Modifier
channels are labeled Mod 1, Mod 2, and Mod 3.
Effect Mode
Adjustments
DMX
Value
Name/Description
Modifier 1
Modifier 2
Modifier 3
0
Safe, no effects selection
NA
NA
NA
1
CMY (RGB inverse)
Cyan
Magenta
Yellow
2
CMY Add, All Pixels
Cyan
Magenta
Yellow
3
CMY Add, All Non-black Pixels
Cyan
Magenta
Yellow
4
RGB Add, All Pixels
Red
Green
Blue
5
RGB Add 2, All Pixels
Red
Green
Blue
6
RGB Add, All Non-black Pixels
Red
Green
Blue
7
RGB Swap to GBR
Red to Green
Green to Blue
Blue to Red
8
RGB Swap to BRG
Red to Blue
Green to Red
Blue to Green
9
Solarize 1 If color value < DMX value, invert color
Red
Green
Blue
10
Solarize 2 If color value > DMX, invert color.
Red
Green
Blue
11
Solarize 3 If color value < DMX, set color to 0
Red
Green
Blue
12
Solarize 4 If color value > DMX, set color to 0
Red
Green
Blue
13
DotP and Resample
Red
Green
Blue
14
Color Cycle DMX value controls cycle speed.
Red
Green
Blue
15
All or Nothing If color value > mod value,
color = 255, else color = 0
Red
Green
Blue
16
Solid color RGB
Red
Green
Blue
17
RGB Invert
From Red
to Cyan
From Green to
Magenta
From Blue
to Yellow
18
RGB, Invert and Swap to GBR
Red to Green
Green to Blue
Blue to Red
19
RGB, Invert and Swap to BRG
Red to Blue
Green to Red
Blue to Green