Hitachi Microscope & Magnifier S-3400N User Manual

2.3    Graphical User Interface (GUI) 

2 - 52 

(1)  Type I manual stage 

It is for image shift operation.    Move the mouse pointer 

  to a position and press down 

left or right button.    The pointer will be changed to 

 mark.  Move mouse to target 

position while holding down the button and then release the button.   
If the above target position is near the center of the image area, the mouse trace line is 
changed and the target position is moved to the center of image.   

 
 
(2)  Type II motorized stage 

All 5 axes are controlled with stage control tools. 
Refer to <3.5.7.4 Operation Methods Used to Move the Specimen Stage> for operation 
procedure. 

 
 
2.3.9  Setup Dialog Window 
 
The Setup dialog window has four tabs.    To open the dialog window, use the following 
operation. 
 

(1) Click the Setup 

  button on the Tool button area of the Operation panel. 

 
(2)  Select following commands from the Setup menu. 

Setup - Optics Setup: 

Opens Optics tab 

Setup - Condition Load:  Opens Op. Cond tab 
Setup - Condition Save:  Opens Op. Cond tab 
Setup - Image Display:  Opens Image tab 
Setup - Photo Condition:  Opens Record tab 
Setup - Data Display: 

Opens Record tab 

 
(3) Click the Detail button on the Cond tab of the Operation panel. 
 
(4) Click the Load/Save button on the Cond tab of the Operation panel. 
 
(5) Clicking Accelerating voltage on the Control Panel and the Emission display area: 

Optics tab