Hitachi Microscope & Magnifier S-3400N User Manual
3.5.1
3 - 37
Fig. 3.5-9 BSE Detail Dialog
IMAGE MODE:
This button switches between detection modes, similar to pressing
the COMP/TOPO/3D buttons in the DETECTOR block.
the COMP/TOPO/3D buttons in the DETECTOR block.
ELEMENT SETTING: Either select radio buttons A-E or click elements in the detector
sensor diagram to set each element to +/
－/OFF.
3.5.1.3 Other Detectors (optional)
By selecting a detector other than SE/BSE in the DETECTOR block, it is possible to observe
images based on the different detector. Optional detectors that are installed can be selected
from a pull-down menu.
NOTICE: Different detectors can be selected by setting a 2-screen display mode by selecting
Dual in the image display size block in the Image tab on the Operation Panel. This
feature allows you to compare images from different detectors in realtime or display a
composite image from different detectors. For further details, see Section 3.9.3
Signal Selection and Color Mixing.
feature allows you to compare images from different detectors in realtime or display a
composite image from different detectors. For further details, see Section 3.9.3
Signal Selection and Color Mixing.