Hach sc1000 User Manual

The sc1000 controller supports remote control through dial-up connection (GSM modem) 
and LAN connection (service port) . The sc1000 controller is operated remotely with a 
web browser from a computer to configure the controller, download data logs and upload 
software updates.

For detailed information on the LAN connection, refer to 

 

For detailed information on the GSM connection, refer to 

. 

To set up LAN connection between a computer and the sc1000 controller certain settings 
are necessary:

On position 1-3 the IP address of the sc1000 controller and the computer must 
correspond. Set the IP address of the sc1000 controller under 
SYSTEM SETUP, BROWSER ACCESS, IP ADDRESS.

Example: 

IP address sc1000 controller: 192.168.154.30

IP address computer: 192.168.154.128

Do not use 0,1 or 255 on position 4 of the IP address.

Do not use the same IP address for the computer and the sc1000 controller.

The Netmask of the sc1000 controller and the computer must correspond (by default: 
255.255.255.0). Set the Netmask of the sc1000 controller under 
SYSTEM SETUP, BROWSER ACCESS, NETMASK.

To set up a LAN connection (provided Windows XP and an Ethernet Adapter are used) 
change the settings of the computer network card and add a fixed IP address.

1. In the Windows Start menu, select Programs, Settings, Control Panel, Network 

Connections.

2. Right-click the Local Area Connection (LAN) option and select the Properties 

command.

3. In the LAN Connection dialog box press the Configure button.

4. In the Ethernet Adapter dialog box select Media Type under Properties.

5. In the Value drop-down list box select 10BaseT.

6. Confirm all settings.